DOWN4SOUND

Down4Sound JP83 | 8300 WATT RMS Class D Amplifier

SKU:
JP83-nli
Availability:
Usually ships in 24 - 48 hours.
On Sale
  • Down4Sound JP83 | 8300 WATT RMS Class D Amplifier
  • Down4Sound JP83 | 8300 WATT RMS Class D Amplifier
  • Down4Sound JP83 | 8300 WATT RMS Class D Amplifier
  • Down4Sound JP83 | 8300 WATT RMS Class D Amplifier
MSRP: $2,249.99
Now: $1,499.99
Was: $2,249.99
— You save $750.00

Description

JP 83 Amplifier: 8300W PLUS RMS MONOBLOCK Amplifier

We're excited to introduce the new JP-83! This is a 8300+ watt RMS (plus way more if your electrical is solid) monoblock amplifier will make any subwoofer pounds its lungs out with bass like never before. The increased power demand means this unit needs a big 3 Alt+ Reserve battery installed. Connection is 3 zero gauge power and ground wire inputs. To keep the this monster thermal stable, we upgraded the weight of the heat sink and added active hi-flow internal fans. You'll also notice that this 8000 watt monster the TRUE tiffany RCA connections, not no off the shelf junk, because a great sound, starts with great connections. This amplifier is strappable (linkable) so you can really harness the power. The D4S JP83 amplifier means the business for anyone looking for an 8000 watt+ monoblock amplifier!

This 8000 plus watt amplifier MUST HAVE an ELECTRICAL UPGRADED INSTALLED, OR NO WARRANTY. **** READ IT AGAIN****

THIS MEANS YOU NEED A BIG 3, UPGRADED ALT, AND RESERVE BATTERY(s) to support this amplifier and any others you may have in your setup. If you do not have the proper electrical before installing this amplifier, you will not have a warranty. 

Our Ratings on Power for the JP83:

  • 1-ohm rating: 8300 WATTS RMS 
  • 2-ohm rating: 6300 WATTS RMS 
  • 4-ohm rating: 3300 WATTS RMS

Other Specifications on the JP83:

  • Frequency response : 14Hz –271Hz
  • Signal to noise : 92dB
  • Damping factor : 500 <
  • Input sensitivity : 6V –0.2V
  • Subsonic filter : 10Hz –50Hz
  • Low pass filter : 35Hz –250Hz
  • Phase : 0 –180 degree
  • Strappable connection
  • Working to half ohm in speaker connection
  • Clipping indicator
  • BT Remote control with Voltage and Temperature display, Clipping indicator.
  • C type power connection for BT remote
  • Fusing: 900A TOTAL | 300A for each positive wire (3x)
  • 4ga speaker output
  • 3 x 0ga power inputs
  • Operating voltage : 9 to 15.5 Volts
  • Dimensions of the JP83: 24 inches (L) x 9.37 inches (W) x 2.63 (H)

MADE IN SOUTH KOREA

JP83 MANUAL

 

jp837.jpg

jp83.jpg

View AllClose

Warranty Information

Your new Down4Sound product is covered by 1 limited warranty if purchased from Down4Sound or an authorized Down4Sound dealer. This warranty does not cover improper installation, accidental damage, misuse, abuse, improper wiring, operation of unit outside of listed specifications, or any product that has been modified or repaired by anyone other than Down4Sound. Your warranty covers defects in materials and/or workmanship ONLY and is not an insurance policy. The warranty only covers the original owner of the amplifier. All warranty returns must be accompanied by the original sales invoice or receipt. You must contact us to request an RMA number prior to sending any returns via the RMA request form on our website. You are responsible for the cost of shipping your product back to us for warranty examination. If your product is covered under warranty, shipping back to you will be at no charge to you – if your product is replaced/repaired outside of warranty you must pay for return shipping and repair bill prior returning of the product or if no defect is found you are required to pay for return shipping only. At the sole discretion of Down4Sound your product will be either repaired or replaced when it is being covered under warranty. In the event of shipping damage due to improper packaging on products being returned to Down4Sound the customer is liable for the cost of all damages, necessary repairs, or replacement. Be sure to properly pack your return! * Extended additional warranty purchased on amplifiers take in affect from the date of purchase and must also be stated on orginal sales invoice or receipt.
View AllClose