DOWN4SOUND

Down4Sound JP33 | 3300 WATT RMS Class D Amplifier

SKU:
JP33-nli
Availability:
Usually ships in 24 - 48 hours.
On Sale
  • Down4Sound JP33 | 3300 WATT RMS Class D Amplifier
  • Down4Sound JP33 | 3300 WATT RMS Class D Amplifier
  • Down4Sound JP33 | 3300 WATT RMS Class D Amplifier
MSRP: $1,049.99
Now: $599.99
Was: $1,049.99
— You save $450.00

Description

JP 33 Amplifier: 3300W PLUS RMS MONOBLOCK Amplifier

We introduce the JP-33 , the 3300 WATT RMS (PLUS WAY more if you have a solid electrical) monoblock amplifier. It's like an 3k (3000 WATT) amplifier just with WAY more power. This 3000 watt amp is great for a serious basshead looking to bang some monterous , storm stomping bass out of their subwoofer.. REMEMBER, This isn't your typical 3000 WATT plus amplifier, we upgraded the input to 2 power and grounds, added the best RCA's true tiffany, the internal fan now stays on as soon as you turn on the amplifier to keep it cooler longer. The color is Battleship Grey.

This 3000 plus watt amplifier MUST HAVE an ELECTRICAL UPGRADED INSTALLED, OR NO WARRANTY.

THIS MEANS YOU NEED A BIG 3, UPGRADED ALT, AND RESERVE BATTERY(s) to support this amplifier and any others you may have in your setup. If you do not have the proper electrical before installing this amplifier, you will not have a warranty. 

Our Ratings on Power for the JP33: TESTED at 14.4V @ 1% THD

  • 1-ohm rating: 3300 WATTS RMS 
  • 2-ohm rating: 2300 WATTS RMS 
  • 4-ohm rating: 1200 WATTS RMS

Other Specifications on the JP33:

  • Frequency response : 14Hz –260Hz
  • Signal to noise : 96dB
  • Damping factor : 300 <
  • Input sensitivity : 6V –0.2V
  • Subsonic filter : 10Hz –50Hz
  • Low pass filter : 35Hz –250Hz
  • Phase : 0 –180 degree
  • Strappable connection
  • Working to half ohm in speaker connection
  • Fusing: 350A TOTAL | 175A each positive input ( x2)
  • Clipping indicator
  • BT Remote control with Voltage and Temperature display, Clipping indicator.
  • C type power connection for BT remote ( this unit does not have rechargeable batteries) external battery back required our usb power of some sort)
  • 4 ga speaker output
  • 2 x 0ga power inputs
  • Operating voltage : 9 to 16 Volts
  • Dimensions : 13.8 INCHES (L) x 9.37 INCHES (W) x 2.63 INCHES (H)

MADE IN SOUTH KOREA

JP33 MANUAL

View AllClose

Warranty Information

Your new Down4Sound product is covered by 1 limited warranty if purchased from Down4Sound or an authorized Down4Sound dealer. This warranty does not cover improper installation, accidental damage, misuse, abuse, improper wiring, operation of unit outside of listed specifications, or any product that has been modified or repaired by anyone other than Down4Sound. Your warranty covers defects in materials and/or workmanship ONLY and is not an insurance policy. The warranty only covers the original owner of the amplifier. All warranty returns must be accompanied by the original sales invoice or receipt. You must contact us to request an RMA number prior to sending any returns via the RMA request form on our website. You are responsible for the cost of shipping your product back to us for warranty examination. If your product is covered under warranty, shipping back to you will be at no charge to you – if your product is replaced/repaired outside of warranty you must pay for return shipping and repair bill prior returning of the product or if no defect is found you are required to pay for return shipping only. At the sole discretion of Down4Sound your product will be either repaired or replaced when it is being covered under warranty. In the event of shipping damage due to improper packaging on products being returned to Down4Sound the customer is liable for the cost of all damages, necessary repairs, or replacement. Be sure to properly pack your return! * Extended additional warranty purchased on amplifiers take in affect from the date of purchase and must also be stated on orginal sales invoice or receipt.
View AllClose