DOWN4SOUND

DOWN4SOUND JP95 - 1500W RMS 5 CHANNEL AMPLIFIER

SKU:
JP95-nli
Availability:
Usually ships in 24 - 48 hours.
On Sale
  • DOWN4SOUND JP95 - 1500W RMS 5 CHANNEL AMPLIFIER
  • DOWN4SOUND JP95 - 1500W RMS 5 CHANNEL AMPLIFIER
  • DOWN4SOUND JP95 - 1500W RMS 5 CHANNEL AMPLIFIER
  • DOWN4SOUND JP95 - 1500W RMS 5 CHANNEL AMPLIFIER
MSRP: $689.99
Now: $359.99
Was: $689.99
— You save $330.00

Out of stock

Description

JP 95 AMP: Your Ultimate 5 Channel Amplifier

Experience the power and precision of the JP 95 AMP, a 5 channel amplifier that delivers a total of 1500W RMS. This amplifier is not just a piece of equipment, it's a game-changer in the world of sound systems. With its roots in Las Vegas, NV, and Dunnellon, FL, the JP 95 AMP is a testament to American innovation and craftsmanship.

The JP 95 AMP is a versatile 5 channel amplifier that stands out in the crowd. Its heatsink, a carryover from the JP23, ensures optimal performance under any conditions. The amplifier's radiant red color is a nod to the classic days of Down4Sound and Car Audio, adding a touch of nostalgia to its modern design.

Inside the JP 95 AMP, you'll find a fan that cools the output side, ensuring that your amplifier stays at the right temperature even during the most intense sessions. The fan stays on and the amplifier features a sleek plexi black plate. It also comes with a Bass Knob equipped with a voltage and temperature meter, giving you complete control over your sound.

The JP 95 AMP is built to last, with a standard 1-year warranty covering manufacturing defects. Please note that this warranty does not cover damages resulting from incorrect setup, misuse, or accidents.

When it comes to power, the JP 95 AMP is second to none. It delivers:

  • 900W x 1 RMS power at 1ohm for CH5
  • 200W x 4 + 700W x 1 RMS power at 2ohm
  • 120W x 4 + 400W x 1 RMS power at 4ohm
  • 400W x 2 RMS power at 4ohm when bridged

These ratings are based on worst-case scenarios, ensuring that you get the best performance no matter what. Independent 3rd party testing by Big D WIZ on the SMD Amplifier Dyno further confirms the power of the JP 95 AMP.

The JP 95 AMP also offers a range of tuning specs for each channel, including High Pass Filters, Low Pass Filters, and a Bass Boost for CH5. Its frequency response ranges from 10Hz - 30KHz for CH1 - CH4, and 10Hz - 240Hz for CH5.

The amplifier comes with a remote Bass Knob that includes a Voltmeter & Temperature display, giving you full control over your sound system. It operates at a voltage range of 9 to 16 Volts and has a fuse rating of 160A. With a length of 17.71", a width of 7.4", and a height of 2.24", the JP 95 AMP is compact enough to fit in any setup.

In the world of 5 channel amplifiers, the JP 95 AMP is a standout product. Its combination of power, versatility, and durability makes it the perfect choice for anyone looking to upgrade their sound system. Experience the difference today with the JP 95 AMP.

INDEPENDENT 3RD PARTY TESTING RESULTS : Big D WIZ TESTED ON SMD AMPLIFIER DYNO

  • RMS power, 1ohm for CH5 BASS CH: 1212 W x 1 
  • RMS power, 4ohm: 120W x 4 Channels + Bass Ch: 482 Watts RMS x 1
  • RMS power, 2ohm: 200W x 4 Channels + Bass Ch: 816 Watts RMS x 1

JP95 Tuning Specs

CH1 & CH2

  • High Pass Filter: 20Hz - 5KHz

CH3 & CH4

  • High Pass Filter: 20Hz - 500Hz
  • Low Pass Filter: 50(500)Hz - 500(5K)Hz
  • Low pass Filter Multiply: x1, x10


CH5 (BASS CHANNEL)

  • Subsonic Filter: 10Hz - 50Hz
  • Low Pass Filter: 35Hz - 250Hz
  • Bass Boost: 0 - 9dB

Frequency Response

  • 10Hz - 30KHz for CH1 - CH4, 10Hz - 240Hz for CH5
  • Remote Bass Knob: Voltmeter & Temperature display remote control included
  • Input Sensitivity: 6V - 0.2V
  • Signal to Noise Ratio: 95dB <
  • T.H.D @ 4ohm: less than 0.1%
  • Operating voltage : 9 to 16 Volts
  • Fuse Rating: 160A
  • Length ( inches ): 17.71" 7.4" W x 2.24" H

JP95 MANUAL

View AllClose

Warranty Information

Your new Down4Sound product is covered by 1 limited warranty if purchased from Down4Sound or an authorized Down4Sound dealer. This warranty does not cover improper installation, accidental damage, misuse, abuse, improper wiring, operation of unit outside of listed specifications, or any product that has been modified or repaired by anyone other than Down4Sound. Your warranty covers defects in materials and/or workmanship ONLY and is not an insurance policy. The warranty only covers the original owner of the amplifier. All warranty returns must be accompanied by the original sales invoice or receipt. You must contact us to request an RMA number prior to sending any returns via the RMA request form on our website. You are responsible for the cost of shipping your product back to us for warranty examination. If your product is covered under warranty, shipping back to you will be at no charge to you – if your product is replaced/repaired outside of warranty you must pay for return shipping and repair bill prior returning of the product or if no defect is found you are required to pay for return shipping only. At the sole discretion of Down4Sound your product will be either repaired or replaced when it is being covered under warranty. In the event of shipping damage due to improper packaging on products being returned to Down4Sound the customer is liable for the cost of all damages, necessary repairs, or replacement. Be sure to properly pack your return! * Extended additional warranty purchased on amplifiers take in affect from the date of purchase and must also be stated on orginal sales invoice or receipt.
View AllClose